March 29, 2024

White toilet seat decoration in bathroom interior - Vintage Light Filter

Bathroom – a particular room in the house or apartment. There is always high humidity in the bathroom, so the requirements for finishing must be increased. It’s easy to fix the bathroom with your bare hands;

How to fix the bathroom, so it is comfortable? Bathroom sizes can be small, medium, and large. Of course, the design of toilets of different sizes varies. Particular difficulties arise when you need to make repairs in the small size bathroom. How to make a small bedroom comfortable and beautiful?

First of all, it is necessary to replace the plumbing. If there is a large bathtub and front sink in a small room, then there is no room for anything else. So, more and more often, in small rooms, the bath is replaced by a shower or a corner, and a corner washbasin replaces the front sink. You can call today for bathroom repair.

A small bathroom is decorated in bright colors, and lamps are mounted on a false ceiling. Light colors make the room look bigger. Recessed lights don’t “steal” space, as do hanging chandeliers. It is recommended to use mirrors and shiny chrome metal. The bathroom must be well lit.

Material Selection

How to fix the bathroom using the best finishing material? If a shower corner replaces the bath, the walls are faced with tiles because, in the corner shower room, two walls are used for the shower cubicle, water flows over them. In the space where water does not fall, you can arrange other finishing materials such as plastic panels. But bathroom tiles are much preferable, albeit more expensive. Here everyone must proceed from their financial capabilities. But it is necessary to consider that high-quality tile mounted on bathroom walls cannot lose its original appearance for decades.

Acrylic Bath

The advantage of an acrylic bath is that it is durable, it has a small weight, a large selection, the water holds the heat for a long time. Rack ceilings made of plastic or metal slats are often used as a roof. It’s easy to install and easy to make with your own hands. Use and ceilings of plaster, glued foam, or stretch mounted. The roof of the rack is also nice because it’s very easy to fix the built-in spotlights. The bathroom floor can be laid with tile, porcelain stoneware, or made in bulk.

  • To repair
  • Ceiling vapor barrier
  • The scheme vapor barrier ceiling.

It is necessary to begin repair with waterproofing of walls, a floor, and a ceiling of the room. In the presence of waterproofing, moisture will not penetrate the walls so that the finish will last much longer. Waterproofing the floor will not allow water to leak to your neighbors, and waterproofing the ceiling will protect your repair if an accident occurs on your neighbors’ top floor. As a water proofer, use rollers or coating materials. There are many of them on sale or you can visit our website.

After waterproofing, the walls, floor, and ceiling are plastered and leveled. If the ceiling is the slat, it is not necessary to level the surface of the bathroom ceiling, as the slats will cover any irregularities. The walls and ceiling must be level using the building level. If walls and floors are installed, surface preparation is recommended. The primer will close all the pores and microcracks, and the glue when installing the tile will be better for bonding the material. The tile is placed in a special glue; the joints are rubbed with putty designed for them.

If the walls have panels, you will need to assemble a wooden box or metal profile and attach the panels to it. In this case, the walls must be treated with a special compound that protects them from the formation of fungus.

For a do-it-yourself installation of a slatted ceiling, you must first make a marking. At the top of the wall, set back 10-15 cm from the bathroom ceiling, a horizontal line is drawn around the room’s perimeter. It is necessary to use a level and a cut segment, as the line must be strictly horizontal. Marking the attached plastic or metal profile. Next, suspensions are attached to the room’s ceiling, where the tires are fixed for mounting the rails.

The suspensions are mounted at a distance of not less than 1 m from each other and not less than 30 cm from the walls. Screws do the installation. To secure all these pieces to the concrete, first drill the holes in which the plastic anchors are placed. Rail-mounted tires just snap into place; you need to insert their ends into the profile on the walls. When installing the recessed lights, the holes in the slats are drilled in advance. And on the ceiling, wiring is placed. Making repairs yourself, it’s best to put the wiring in a special enclosure.

When installing a floor or porcelain, tiles are stacked as wall-mounted tile. The bathroom floor should not be made of ordinary tiles as it will be slippery, which can cause injury.